Quick, simple and safe

Direct plug connectors with PUSH IN technology reduce connection times for solid wires and those with crimped on wire-end ferrules by up to 50 % compared to clamping yoke terminals. The conductor is simply inserted in the clamping unit to get a safe, gas-tight connection. Even flexible conductors can be connected without tools and trouble. Safe and reliable connections are crucial, especially under harsh conditions, such as those in the process industry. Our PUSH IN technology guarantees excellent contact security and ease of handling, even in demanding applications.

Shortcuts to the online catalogue

The benefits at a glance

Time saving

Time saving

Increase efficiency in installation without compromising on safety. The innovative PUSH IN direct plug connector reduces connection times by up to 50 percent compared to clamping yoke terminals.



The enhanced compactness, combined with simple handling, helps improve processes right from the planning stage. PUSH IN technology guarantees excellent contact security and ease of handling

Maximum flexibility

Maximum flexibility

Klippon® Connect gives your cabinet design maximum flexibility thanks to PUSH IN technology. The simple handling helps to improve processes right from the planning stage.

Terminal blocks with PUSH IN Technology

Due to the comprehensive selection of accessories and the various cross-connection options, our modular terminal blocks with PUSH IN technology (A-Series) are the perfect solution for all requirements.

Your advantages
  • Release of conductor without any tool
  • Flexible mounting foot for compensation of different terminal rail dimensions
  • Clear differentiation of functional areas
  • Slim design for large amount of cabinet space
  • Vibration-resistant and gas-tight connection with copper power rails and stainless steel spring

Product news

Klippon® Connect A series with side PUSH IN connection technology Product innovation

Combining the advantages of proven connection technologies

Decentralised systems save space in the control cabinet, but the components have to be installed in small, flat distribution boxes. This leads to new wiring challenges.

The new Klippon® Connect terminal blocks with lateral PUSH IN connection combine the advantages of PUSH IN and screw connection technology. Conductors can be connected without a bending radius, without tools. This reduces the installation height and increases clarity, as markings and functional areas remain clearly visible even when wired.

Klippon® Connect A series with side PUSH IN connection technology
  • Clear wiring without protruding bending radius
  • Clear recognition of the functional areas, even in the wired state
  • Compatible with classic connection PUSH IN terminals
  • Uniform test system with standardised test tap

PUSH IN - disconnect terminal blocks with 3.5 mm width

Our ADT 1.5 disconnect terminal blocks offer the option of disconnecting signals up to 10 A with a minimum width of just 3.5 mm. Integrated and standardized testing points in front of and behind the disconnection area enable simple and safe testing and inspection in the field, even when wired.

Test disconnect and fuse terminal blocks A2T 4 FS and A2T 4 DT

The number of sensors and actuators in the field is growing. More and more potentials have to be wired, fused, or even separated in the control cabinet. One example is servomotors with the potentials plus, minus, or PE. They require clear wiring, including fused potential.

The new two-tier terminals of the A2T 4 FS and A2T 4 DT series combine up to three functions per terminal. For example, you can choose between "Disconnect, feed through, PE" or "Fuse, feed through, PE" Sensors and actuators can be wired conveniently and clearly on just one terminal block. The potentials can be fused or also disconnected. Cross-connection channels on each level ensure safe potential distribution on the terminal strip.

3-level terminal block A3T 1.5

Increasing automation increases the number of sensors and actuators within the plant. With constant space conditions within the switchgear cabinet, these sensors and actuators must be wired clearly. More compact designs of the components and the increase in wiring density are the resulting requirements for the control cabinet components.

Our A3T 1.5 three-level terminal blocks with 3.5 mm pitch meet these requirements. Depending on the variant, they each carry a different or a common potential on three levels. For example, up to 60 wires can be contacted and 30 different potentials can be routed on a width of 3.5 cm. Each potential can additionally be cross-connected to the adjacent terminal block via a ZQV. This achieves maximum wiring density.

A-Series high-current terminal blocks with PUSH IN power connection in 185 mm² Product innovation

For fast and safe wiring of big cross-section

The new A2C 150/185... Versions of our high-current terminal blocks are suitable for cross-sections from 25 to 185 mm² and feature the innovative PUSH IN-Power connection technology. This means you can use a single convenient connection system for the entire cross-section range and have consistent access to the wide range of accessories of the Klippon® Connect A series.

A-Series high-current terminal blocks with PUSH IN power connection in 185 mm²
Your benefits at a glance
  • Good visibility marking
  • Standardised testing options
  • Identification of external voltage
  • Pre-aseembled blocks
  • Innovative PUSH IN-Power connection


Fast wiring. But safe.

Fast wiring. But safe.

This is a YouTube video. By clicking on this video, you agree to Google/YouTube's Privacy Policy & Terms of Use . You also agree to our Privacy Policy.

With PUSH IN connections, the prepared conductor is simply inserted into the clamping point and a reliable, vibration-resistant, and gas-tight connection is established. The integrated pusher allows the conductor to be easily released with a screwdriver.

Consulting & Support