800.268.4080
New Products!
ST Ring Lug Terminal Blocks – Compact and Touch Safe
 |
In addition to meeting CSA/UL standards for high voltage power transmission applications, the ST Ring Lug line offers the fastest termination method for ring lug style terminals by incorporating a hinged shroud and a self-locking (captive) fastener in a new touch-safe design. Additional features include jumper capabilities to distribute voltage and signals, test disconnect terminals, a combi-foot design for TS-32 and TS-35 DIN-rail mounting, and numerous connection options from lug dimension to standard or integrated test socket screws. Also included in the ST Series are new variations of Weidmuller’s classic open-style ring lug terminals. |
SPD Series: DIN-Rail Mountable Surge Protection Family
 |
The SPD II range of surge protectors are used for transient surge protection of single and multi-phase power circuits at the main electrical panel. SPD IIIs are for the protection of individual electrical devices. They provide common-mode protection (between each Line and Ground), with impulse discharge capacity (Imax) 40kA for SPD II and 20kA for SPD III. |
M23 Circular Connectors
 |
Weidmuller introduces a new modular M23 connector family featuring compact and robust Circular Connectors for signal, power and hybrid (signal and power) applications. Weidmuller’s M23 Circular Connectors are designed for use outside the cabinet in machine and industrial automation applications. |
WDK 10 - Double Level Terminals Reduce Cabinet Space by 50%
 |
Weidmuller’s new WDK 10 dual-level terminal is designed to reduce cabinet space by 50% and is ideally suited for applications where there is limited panel space for power distribution terminal installations. Two configuration types are available, Dual-level (WDK 10) and a Dual-level bussed (WDK 10 V) that commons 4-wires to one terminal. With a 10mm width, the new WDK 10 offers one of the highest wiring densities among screw terminals for power distribution applications requiring 6AWG conductors. |
ACT20P Bridge: Strain Gauge Transmitter for Reading Load Cells
 |
Designed for factory and process load-cell applications that include engine and turbine strain measurement, and weight or level controls, Weidmuller’s ACT20P Bridge signal converter/isolator provides precise performance in a compact design. This new-generation converter/isolator will accept up to 4 load cell inputs in a single unit. |
VARITECTOR: Surge Protection for Instrumentation, Control and Automation Circuits
 |
With the VARITECTOR SPC, Weidmuller offers a new family of surge protection devices for control and instrumentation (C&I) applications. In industrial control systems, it is often necessary to protect instrumentation against electrical surges, caused by remote lightning strikes. These surges can distort signals and damage connected devices. Varitector allows users to ensure their C&I devices are protected from lightning induced surges in cables. |
Industrial Ethernet Switch Solutions
 |
Weidmuller has expanded it's offering of Industrial Ethernet Switches with the new Basic, Value and Premium lines. Now your single source for switch solutions, Weidmuller provides a full line of unmanaged, lean managed and fully managed switches. The units provide rugged, industrial grade solutions with high quality IP30 rated metal housings, vibration-resistant construction, and operating temperatures from -40°C to +75°C. Expanded options include Power over Ethernet (PoE) switches, gigabit switches, multimode and single mode media converters. |
WDK 2.5 Terminal Series - For Machinery, Process and Power Generation Industries
 |
The new WDK 2.5 DU PE TR multiple level terminal blocks are designed to reduce cabinet space and increase functionality in signal-loop circuit installations. By connecting the signal wire to the upper level, the neutral to the lower level and the shield to the integrated PE contact, a signal loop can be connected to just one terminal. The unique integrated PE contact also eliminates the need for a separate PE terminal block and reduces needed cabinet space. At only 5.1mm wide, the new WDK 2.5 DU PE TR is one of the highest wiring density solutions in screw-clamp termination for DCS marshalling or PLC applications. |
DRM Series Relays
 |
The new DRM miniature relays complement Weidmuller’s wide range of proven electromechanical and solid-state devices. DRM relays offer functionality to meet industrial standards, at an economical price point. The DRM is available in 2 and 4 changeover contact versions for AC and DC voltages to suit most industrial and commercial applications. DRM relays are available with LED status indication, as well as a test lever for quick and easy commissioning and troubleshooting. The relay bases are DIN-rail mountable and feature high quality screw terminals. |
TERMOPTO Solid-State Relays
 |
Weidmuller introduces the new TERMOPTO solid-state family of relays– electrical isolation in the size of a terminal block. The innovative TERMOPTO functions as both a terminal block for signal connection, and a relay to separate signals, all in one compact module. With a width of just 6 mm, the TERMOPTO provides proven optocoupler technology in miniature form for significant space savings in the control cabinet. |
MCP Basic Plotter
 |
Weidmuller has expanded our marking systems printing capabilities with the new MCP Basic Plotter. This latest generation plotter complements the Weidmuller MultiCard identification markers for terminal blocks, wires, cables and other electrical equipment. The MCP Basic is compatible with MultiCard marker formats, works in conjunction with Weidmuller’s dynamic M-Print Pro® software, and comes with a travel case for easy transport and storage, making it an ideal choice for customers with low volume or on-site printing requirements.
|
ACT20X: Isolated Digital Barriers
 |
Weidmuller introduces the new ACT20X range of digital isolators, specifically developed for hazardous area applications. This range of intrinsic safety signal conditioners includes modules that can convert and isolate digital signals to and from hazardous areas, as well as versions that isolate and drive digital actuators. Only 22.5mm wide, these space-saving devices are part of Weidmuller’s wide range of isolators and converters for process applications in hazardous areas.
|
WMF 2.5: Multi-Functional Terminal Block Series
 |
The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and ease of terminal installation are desired. The WMF 2.5 series is offered in configuration types including fuse, disconnect and feed-through with pluggable connectors. The WMF 2.5 terminals are 5 mm wide, providing a 20% space savings when compared to typical fuse terminals at 6-8 mm.
|
M12 Cables with Plastic Coupling Nuts
 |
Weidmuller’s plastic coupling nuts are designed for harsh environment applications where aggressive cleaning agents are used or corrosive elements are present. They are an economical alternative to expensive stainless steel solutions often used in corrosive environments.
|
RailDesigner 5.0 Software
 |
Weidmuller is pleased to announce the release of RailDesigner® 5.0 software for selecting, planning and ordering custom designed rail assemblies. The existing features of RailDesigner and new improvements combine in version 5.0 to provide the best environment to design your custom rail. The new improvements to this most recent version of RailDesigner® include: a search and replace feature; an improved printing menu; a real-time 3D plan and print option; and several data exchange enhancements. Click here for your free download!
|
"Wireless in a Box" - Complete Wireless Ethernet or I/O Enclosures
 |
Weidmuller introduces the first complete “Wireless in a Box” solution for the industrial market. Two versions are available– each containing unique design features. An Ethernet version enables quick and easy deployment of wireless Ethernet; while an I/O version allows for the fast installation of multi-point wireless direct I/O. Both “Wireless in a Box” solutions are designed to provide complete wireless connectivity for remote monitoring and sensing applications. They are NEMA 4X and IP67 rated, making them suitable for applications such as water wastewater, pumping stations and tank farms. |
Delcon Series - Solid State Relays
 |
Pulse transformer technology for isolating I/O signals offers significant advantages over optical isolation and electromechanical relays. Most notably, pulse transformer I/O modules provide higher transient immunity and high input-to-output isolation. The high transient immunity means the Weidmuller - Delcon I/O modules are ideal for I/O applications where electrical noise is a problem. No additional suppression components are needed even when used with long unshielded signal cables, inductive loads or ‘noisy’ power lines. |
MICROOPTO - Solid State Relays
 |
Weidmuller is expanding the innovative MICROOPTO family of opto-couplers or solid-state relays with 4 new versions. These new optocouplers are specially designed for applications that include switching and amplifying actuators, signal inversion and converting TTL signals. With extremely fast response time, reliability, compact size and low power usage, the MICROOPTO opto-couplers offer several advantages for automation installations. The new MICROOPTO products include the MICROOPTO SOLENOID, the MICROOPTO 1CO and two MICROOPTO TTL converter devices. |
CH20M - The Modular Electronics Housing System
 |
CH20M (Component Housing IP20 Modular) – the new housing standard from This innovative housing system incorporates excellent functionality, reliability, and safety in a user friendly package. The CH20M was designed to maximize the amount of printed circuit board space and offers multiple levels of input/output density. This high level of flexibility makes the CH20M suitable for a variety of applications. In addition, the CH20M was designed for fast, easy processing through all stages of assembly, resulting in a lower total cost solution. |
4th Generation Stripax®
 |
Weidmuller is pleased to introduce the new 4th Generation Stripax® and Stripax® 16 tools for processing PVC insulated wire from 28…6 AWG. For over 30 years, the Stripax® has set global standards as a cutting-edge stripping tool. The new 4th generation Stripax® displays the same high quality, but now also features improved
functionality and a comfortable ergonomic design for improved handling in industrial processes. |
PRO-M Series Power Supplies
 |
Weidmuller’s new PRO-M Series Switchmode Power Supplies offer a host of advantages. Available in 10 different versions, the 24 VDC PRO-M power supplies all feature a solid ultra-slim metal housing, and are designed to mount on a DIN-rail with no ventilation gap required between multiple units. This feature provides up to a 50% savings in space and allows the PRO-M to fit into the tightest spaces in control cabinets or machines.
|
WAVE TTA: Universal Signal Conditioner
 |
Weidmuller announces the addition of a new module to their WAVESERIES line of analog signal conditioners – the WAVE TTA (Transmitter Trip Amplifier). This new module provides a unique degree of flexibility, functioning as a signal isolator, transmitter, converter, linearizer and trip amplifier, all in a single unit. The WAVE TTA offers users precision measurement accuracy to meet the diverse and demanding needs of the process industry. The TTA will function accurately over a wide ambient temperature range, and over a wide supply voltage range, and with most types of sensor inputs. For two wire current transmitters, 24 V DC power is provided. Alternatively the TTA can be a passive input for the current source. Most commonly used temperature sensors and DC inputs are accepted, and the TTA also allows the user to define specific characteristics, so special sensor types and linearization can easily be accommodated.
|
Heat Trace Connectors
 |
Weidmuller is pleased to introduce a new and innovative Heat Trace Connector for use in the oil and gas and petrochemical industries. Designed to withstand harsh outdoor environments and conditions surrounding exposed oil pipelines, Weidmuller’s Heat Trace Connector provides an electrically and environmentally reliable method to interconnect oil pipeline heat trace elements. It also offers users a substantial reduction in installation time and cost over the traditional junction box method of connections. Class 1 Division 2 Approved |
BLF 5.0x mm Plugs
 |
Weidmuller is pleased to introduce our BLF plugs for 5.00 mm and 5.08 mm pitches. The new BLF plugs utilize Push-In connection technology for a tool free connection. The BLF 5.0x mm joins existing Push-In products in 3.50 and 3.81 mm pitches, which provide customers with a wide variety of termination options in a pluggable connector solution. Our Push-In allows for the fastest and easiest connections in the market with only a 20% reduction in pull out force when compared to a screw connection. These plugs allow you the flexibility of using solid, stranded or ferruled wires. |
T-Series Power Supplies
 |
The T-SERIES is a new generation of high performance DIN-rail mounted single-phase power supplies designed to work reliably even under demanding factory floor conditions. A high power reserve guarantees reliable start-up of loads with high inrush currents. Excellent electrical specifications and high immunity against electrical disturbances makes these compact modules the best choice to power sensitive loads in industrial process control systems, machine tools or other demanding industrial applications. The T-SERIES offers users easy installation with detachable screw terminal block and snap-on mounting on DIN-rails. |
STB Enclosure Series
 |
"New" Mirror polished-stainless steel (small) enclosure series ideal for applications requiring certified enclosures to ATEX (European) and NEMA (N. American) hazardous norms Series consists of 8 sizes(4.5" x 4.5" to 10" x 16") offered in electropolished or Mirror-Polished Stainless Steel. Where used: Transportation, Energy, and Process industries that have requirements for enclosures designed (with electrical components - "ignition source") into environments where flammable/explosive liquids, gases or dust can potentially be present. In addition, to supplying empty enclosures Weidmuller also offers custom builds based on end user requirements. |
PLC Interface Solutions
 |
Weidmuller now offers a full line of pre-assembled Interface cables in conjunction with an expanded line of space saving universal Interface modules for a broad range of industry standard PLCs. This new line is designed to give users easy, quick and secure I/O wiring. The pre-assembled Interface cables and modules are available for the most common industrial PLCs and Micro PLCs from major manufacturers including Rockwell, Siemens, GE Fanuc, Telemecanique, Omron and ABB.
|
Systemized Marking: PrintJet PRO
 |
Weidmuller announces a new tag and marker printer for industrial use. The third-generation of the PrintJet Pro ink-jet printer prints clear and durable plastic markers designed for direct mounting onto devices, cables, relays, and terminal blocks.
The system prints on blank plastic MultiCard-format markers and comes with an integrated MultiCard print loader. |
Crimpfix 2.5M
 |
Now available, an automated machine that attaches individual reeled-ferrules onto conductors in one step. Like its predecessor, the Crimpfix 2.5, the new Crimpfix 2.5 M performs accurate stripping and crimping ferrules onto conductors in the range of 20 – 14 AWG, in as little as 1.5 seconds per wire. In addition, the new Crimpfix 2.5 M incorporates a simple conversion tool that increases the wire gauge range to 22 AWG (sold separately) and a menu driven display. |
New MultiCard Markers
 |
Weidmuller has expanded the MultiCard marker family by offering the NEW WAD MC 5 and WAD MC 8 terminal markers for use on feed through terminals WDU 2.5, WDU 4, WDU 6, and WDU 10, and end brackets WEW 35/2 or ZEW 35/2. This new format allows the markers to be printed on using Weidmuller’s Print Jet Pro or Print Jet II technology. In addition, our most popular Dekafix and WS MultiCard marker formats for terminal block marking are now available without a project field, allowing for faster installation in strips on terminal block groupings. |
